Supplying Timber Frame House and Extension Kits to Self Builders and the Trade  
     HOME      PRODUCTS     HOUSE KITS & EXTENSIONS     FRAME SPECS     CONTACT   
   
 
Timber Frame Specifications  Wall Insulation

What do you get with your timber frame?

  • Timbers which are pre cut to exact size
  • Pre cut joints and pre drilled where possible
  • Sole Plates which are treated
  • Fixings whenever required in the design
  • Material for internal stud walls
  • insulation ( if required )
  • other components if ordered
  • Scandinavian Treated timber 
  • ghlulam beams & post when required
  • Coded timber for easy identification
  • Drawings showing coded locations
  • Structural calculations 
  • 3D computer drawings
  • Our help and advice




Standard dimensions for a typical timber frame
timber frame extension kit example
roof beams can be left exposed
sample of a door we can supply






Isover or Knauf insulations slabs are supplied as part of the  house kit ( depending on level chosen).  

The insulation for our house & extension kits consist of 2 layers of 100mm for all external walls.  

Panel Vent board 9.2mm thick is supplied for the structural sheathing for the frame but also increases the insulation levels as well.  With this type of construction and level of insulation you can achieve high SAP ratings and low band energy efficiency.      
             
1.Sole Plates 195x45mm
2.External stud walls 195x45mm
3.Internal load and non load bearing 95x45mm
4.Intermediate floor joists 220x45mm
5.Roof joists 220x45mm
CAD drawing of a timber frame home

Computer Aided Design
Frame Assembly

The frame construction is very basic.  By just following the wall plan and finding the corresponding stud with the code number and then slotting the joints together.

Where post and beam are used fixings will be supplied for fitting into the pre-drilled locations.  The intermediate floor joists are also jointed and slot into the wall plates.  Rafters are pre cut and drilled ready for slotting into place and fixing


3D CAD drawing of a timber frame house


Contact:

Tel. 01840 261415

Email. sales@timberframeswestuk.co.uk


Once the architect drawings are complete and you are ready to proceed with the timber frame package, your drawings will be transfered to the computer and you will receive plans showing the sole plate layout with dimensions to enable the foundations to be built.
Wall plans show coded studs, roof and intermediate floor joists and locations.  The 3D plan enables you to see the final timber frame building.
The drawings will be sent before the timber frame arrives which allows you to familiarise yourself with the construction

 
   

All Material and Photos are Copyright to Timber Frames (west) UK Ltd

Valid XHTML 1.0 Transitional